miroir micro projector bios update to iphone

Power on the projector by flipping the power switch to the on position.If no external speaker is connected, the projector's internal speaker will be used for audio. If desired, connect a speaker to the 3.5mm audio out jack.The following help articles will help you determine how to connect a variety of popular phones, laptops, tablets, streaming devices and other devices to your Miroir projector:.NOTE: Some devices may require an adapter to connect to your device. Connect the included HDMI cable to the HDMI port on the projector and the other end to your device.IMPORTANT: Fully charge the battery before the first use (approximately 3-4 hours). To power the projector with the built-in battery, simply turn the projector on.Once connected, the power indicator light will illuminate red on the projector to show it is connected to power. To power the projector with the Micro USB to USB cable, connect the Micro USB to the projector’s and plug the other end into a USB port.The projector can be powered using the included Micro USB to USB cable or the built-in battery.The blue system indicator light will come on if the battery power is getting low. The built-in battery is charged using the included Micro USB to USB cable. Operating the Projector Charging the Battery This button is a small recessed button, so you will need something small, such as a paper clip, to press the button.

Reset button - Press to reset the projector.

The USB cable can be plugged into a USB wall outlet or a USB port on a computer for power. Micro USB power port - Connect the supplied Micro USB to USB charging cable to charge the projector's internal battery or provide the projector with power.HDMI input - Connect the HDMI cable to this port and a device that supports HDMI video output to project content.3.5mm Audio out port - (Optional) Can be used to connect an external speaker or headphones.Power indicator light - This light will illuminate red when the projector is connected to power to show that the battery is charging or receiving power.System indicator light - This light will illuminate briefly as the device starts up, and will also come on if the projector's battery power is getting low.Power switch - Slide power switch forward (toward the projection lens) to power the projector on.Volume down control - Decrease the volume output of the projector.Volume Up control - Increase the volume output of the projector.Focus wheel - Roll left or right to fine tune the image focus.USB Power Output - Connect a USB power cable to provide power to a HDMI streaming stick.HDMI Video Input - Connect an HDMI cable to a device that supports HDMI video output.Audio Out (3.5mm) - (Optional) Connect an external speaker or headphones.Reset Button - Press to reset projector.Fully charge battery before the first use (approx.

Power Port - Connect included AC Adapter/Charger for power.Battery life will be displayed by the number of lit battery indicator lights. Briefly press to check battery life on the projector. Power Button - Press and hold for 3 seconds to power the projector on or off.Volume Controls - Increase/decrease the volume output of the projector.The battery is fully charged when all the lights illuminate and no longer flash. Battery Indicator Lights - Lights flash in turn as the device charges.Rubber Foot Pads – Provides stability and proper airflow to cooling vents.Tripod Mount – Will fi t a standard sized tripod screw.Focus Controls – Turn wheel to adjust focus.Cooling Vent - IMPORTANT: Do not cover or block airflow to the vent.

Miroir micro projector bios update to iphone